Antminer L3

Custom firmware for Anminer L3+/L3++

Basic Bitmain software does not reveal the full potential of ASIC-miner which can be achieved by means of custom firmware placed on our company website.

 Depending on the installed software version, Litecoin mining can take place in one of five modes:

• Reducing power consumption to 600W while maintaining the standard hash rate of 504 MH/s
• Overclocking L3+ up to 580 MH/s with a power consumption increase to 800 W
• ASIC miner overclocking to 640 MH/s at 1000W power consumption
• Overclocking to 680 MH/second at 1180W power consumption
• Acceleration to 720 MH/s at 1300W power consumption growth

Reduced power consumption will allow mining LTC and Dogecoin at higher electricity rates. The rest of the settings, increasing the miner's performance by 20%, will shorten the payback period of the investment made.

In the section for "advanced" users, the custom firmware allows you to set the frequency and voltage level of each board with processors or select the ASIC miner parameter management profiles.

 The installed program contains a menu of chip autotuning, where you can also monitor the technical status of each chip, indicated by three "traffic light" colors.