AntMiner S17

Characteristics AntMiner S17

Antminer S17

Antminer S17 is considered the basic model of the 17-th series ASIC-miner, which most fully reveals the possibilities of the chip 7-nm, used for the first time in the previous 15-th series of equipment Bitmain. The other types of miners of this line, released under different indices, are modifications of S17 with differences in the greater or lesser side on the parameters of hash rate and power consumption.

If the miner does not have specific tasks, the S17 will be the best choice for cryptocurrency mining. Antminer S17 gives the following (passport) characteristics:

• Hashing algorithm: SHA-256
• Computation speed (hash rate): 56 TH/s
• Power Consumption: 2520 W
• Overall dimensions: 178 x 296 x 298
• Weight of equipment: 9.5 kg
• Noise level: 82 dB

The listed performance characteristics are achieved by ASIC-miner when working under the Bitmain standard software. The company's stock software does not always offer all the capabilities of the hardware. User should pay attention to the custom firmware, which can be found in a special section of the site.

Antminer S17 PRO 56

Antminer S17 PRO 56 is positioned by Bitmain, as the most powerful and advanced model in the line of PRO. The company has managed to maintain the energy efficiency of 45 J/TH, as with the Antminer S17 PRO 53, while increasing the hash rate. At the same time, the owner is available flexible modes of setting the equipment, allowing to work in standard and economic mode.

Despite the higher performance, this model is made in a standard enclosure, which facilitates the use of equipment in data centers with a horizontal or vertical installation. Antminer S17 PRO 56 has similar boards and chips to other models 17-1 series, which facilitates repair and operation.

Antminer S17 PRO 56 works with the following features:

• Hashing algorithm: SHA-256
• Calculation speed (hash rate): 56 TH/s
• Power Consumption: 2452 W
• Overall dimensions: 178 x 296 x 298
• Weight of equipment: 9.5 kg
• Noise level: 82 dB

The increase in performance Antminer S17 PRO 56 is due to more advanced stock firmware from Bitmain. Independent developers have created more perfect custom updates, which can be found on the appropriate section of our website.

Antminer S17 PRO 53

The Antminer S17 PRO 53 variation shows Bitmain's attempt to provide large mines with a choice of powerful equipment with an affordable price tag. With a slight reduction in performance, the owner of the equipment received a gain in the cost of the equipment.

Otherwise, the S17 PRO 53 is similar to the other models of this series in chip type and linear dimensions of ASIC-miner, the possibility of its installation in horizontal and vertical position. The versatility of "stuffing" simplifies the repair and operation of this equipment.

Antminer S17 PRO 53 gives the following characteristics:

• Hashing algorithm: SHA-256
• Computation speed (hash rate): 53 TH/s
• Power Consumption: 2094 W
• Energy efficiency: 40 J/TH
• Overall dimensions: 178 x 296 x 298
• Weight of equipment: 9.5 kg
• Noise level: 82 dB

These parameters listed above Antminer S17 PRO 53 achieved on the stock firmware from Bitmain. As a rule, standard software from the manufacturer does not reveal the full potential of the 7nm chip. On our site posted custom updates, which may issue a more effective characteristics for mining.

Antminer S17+76

Bitmain released the Antminer S17+76 in late 2019 as the most powerful device at the time, once again proving its technical superiority over the competition. The ASIC miner has an upgraded BM 1397 AG chip.

The 17+ modification showed the maximum hash rate and power efficiency of the 7-nm chip. The next series was assembled using chips on the 5-nm process.

Antminer S17+76 has the characteristics and produces the following mining performance:

• Hashing algorithm: SHA-256
• Computation speed (hash rate): 76 TH/s
• Power consumption: 2094 W
• Energy Efficiency: 40 J/TH
• Overall dimensions: 178 x 296 x 298
• Weight of equipment: 9.5 kg
• Noise level: 82 dB

The owner of the equipment can improve the above mentioned figures of hash rate and power consumption by using the custom firmware posted on our website. These updates have been developed by independent experts and tested over several years of equipment use.

Usually, the stock firmware by Bitmain is written for the new ASIC-mainer version to be released from the conveyor and is not tested for a long time because the series is changed almost every year. Miners, on the contrary, are interested in the optimal long-term performance of the devices, effectively working off the investment. This is how the custom firmware appears, fully revealing the capabilities of the 7nm chip.

Antminer S17+73

The Antminer S17 +73 variation was a traditional way for Bitmain to give customers a choice of powerful equipment with little difference in performance, but an affordable price tag.

Modification S17 +73 is similar to the other models of the series in chip type and linear dimensions ASIC-miner, the possibility of mounting it in a horizontal or vertical position. 

The equipment has differences in power supply and cooling system. The versatility of sizes and chips on the boards, simplifies the repair and operation of this equipment.

Antminer S17 S17 +73 gives the following characteristics:

• Hashing algorithm: SHA-256
• Chip model: BM 1397
• Calculation speed (hash rate): 73 TH/s
• Power consumption: 3080W
• Energy efficiency: 40 J/TH
• Working Temperature: 5-45C
• Overall dimensions: 178 x 296 x 298
• Weight of the equipment: 9.8 kg
• Noise level: 80 dB

The above mentioned parameters of Antminer S17 +70 are achieved with the factory stock firmware. Standard programs from Bitmain manufacturer, as a rule, do not reveal the full potential of the 7nm chip. 

On our site, there are custom updates that can give a more effective characteristics for mining.

Antminer S17+ 70

The Antminer S17+ 70 ASIC miner was the base model in a line of three types of the S17+ series. They were released at the same time in late 2019, becoming the most manufacturer of miners, strongly outperforming their competitors in terms of performance.

Antminer S17+ ASIC miner is often published without hashrate marking (70). The model has a similar chip model to the other types of 17-series, supports three mining modes: economy standard and turbo (Boost).

Antminer S17+ outputs the following characteristics when working at the factory settings:

• Hashing algorithm: SHA-256
• Chip model: BM 1397
• Computing speed (hash rate): 70 TH/s
• Power consumption: 2680W
• Energy efficiency: 40 J/TH
• Working Temperature: 5-45C
• Overall dimensions: 178 x 296 x 298
• Weight of the equipment: 9.8 kg
• Noise level: 82 dB

Owners of miners can increase the performance of the miner, above these parameters Antminer S17 + with the help of custom firmware. These updates from independent developers, tested for several years, have proven effective and safe operation.

Uploaded on our website, custom firmware will allow the miner to significantly accelerate the investment in the equipment, will extend its life cycle or help to reduce power consumption in order to adjust to the requirements of the infrastructure.

Antminer S17E

The Antminer S17E was released by manufacturer Bitmain in September 2019, as a continuation of the 17-series lineup on the 7-nm chip. The "E" index indicates that the miner is equipped with an innovative heat dissipation system with additional tube installation.

Bitmain has guaranteed buyers of the Antminer S17E a longer-term performance of the units, due to the slow degradation of the chips due to heat dissipation, as well as the manufacturer-installed, anti-virus protection. Energy efficient ASIC-miner S17E gives the following characteristics:

• Hashing algorithm: SHA-256
• Chip model: BM 1397
• Computation speed (hash rate): 64 TH/s
• Power consumption: 2880W
• Power Efficiency: 45 J/TH
• Working Temperature: 5-35 C
• Overall dimensions: 338x175x304
• Weight of the equipment: 10.5 kg
• Noise level: 80 dB

The above mentioned parameters are based on the performance of the Bitmain stock software. Owners of miners can change miner performance and power consumption, above or below the given parameters with custom firmware. These updates from independent developers are the most comprehensive of the potential of the 7nm chips

The custom firmware posted on our website will allow the miner to access more hardware profiles. The ASIC miner owner will be able to optimize the process of investment processing or reduce electricity consumption.